This area is referred to as the Fuel Modification Zone: Areas within 200 feet of any structure, but further than 100 feet from any structure.

• Heavy brush must be “trimmed up” so that all foliage in the lower third of the plant is removed.
• Remove any dead plants ( leave the lowest three inches and root structure to help prevent erosion).
• Remove dead material from live plants.
• All cut material shall be removed or processed as follows: Cut material may be machine processed and left on the property in this area to a maximum depth six inches.
• Machine processed material shall not be placed within 10 feet of usable road surfaces or driveways.

---

Add this page to your favorite websites